How to Make Your Own Pebble Stepping Stones

by Lorraine Kuney 08/09/2021

Stepping stones are a perfect alternative to traditional garden paths. For small spaces or for a more rustic look, stepping stones can liven up a space while providing helpful functionality. There are many styles of stepping stone, such as those made from flagstone or concrete pavers. However, pebble stepping stones are a fun and creative addition to any yard or garden. The best thing about them is that they’re simple to make yourself. Here we’ll go over how to make your very own stepping stones.

Materials

Smooth stones or pebbles
Mortar

Equipment

Paintbrush
Rubber mallet
12x12 inch concrete mold
Protective gloves

Process

  1. Fill the mold with dry mortar, leaving about 1/3 inch at the top.

  2. Level the mortar either by hand or a small float, smooth out the mortar into an even surface. Use protective equipment to avoid skin burn or irritation from the mortar.

  3. Begin arranging the stones by nestling them into the dry mortar. Place them so they are snug against one another and stand up without tipping over.

  4. Because the mortar is still dry, you don’t have to worry about planning a design ahead of time. You can change stone placement as much as you need to make the perfect pattern.

  5. Once the stones are where you want them, use the rubber mallet to tamp them down. Try to make them level with the top of the mold. You can use a piece of wood, a ruler or any other flat object to test the level.

  6. Use the paintbrush to dust off the surface of the stones to remove any extra dry mortar.

  7. Slowly add water to the mortar using a spray attachment on a hose. Keep the water pressure low so that it does not send stones and mortar flying. Plan to do several light rounds of watering rather than drenching the mold.

  8. To test the moisture, use the mallet to tap on the stones. Watch for bubbles to appear or excess water to drain out when you tap the stones—this is your cue to stop watering.

  9. Take your thoroughly damp stepping stone mold to a covered but well-ventilated spot. The mortar will need to cure and harden for at least 48 hours before your stepping stone will be ready to use.

  10. The stepping stone should be hardened and cured after two days. Carefully remove the mold and wash away any loose mortar with water and a paintbrush.

Now you have a beautiful custom stepping stone for your garden. Repeat the process to make an entire path or keep them as standalone points of interest in your landscaping.

About the Author
Author

Lorraine Kuney

Hi, I'm Lorraine Kuney and I'd love to assist you. Whether you're in the research phase at the beginning of your real estate search or you know exactly what you're looking for, you'll benefit from having a real estate professional by your side. I'd be honored to put my real estate experience to work for you.